How To Change Airwheel S3 self-balancing scooter's Tires

  • Source:Airwheel

Abstract: Airwheel S3 double-wheels electric scooter not only has brought together a new science and technology, but also the milestone of material industry. Because of Airwheel S3 outstanding external & internal appearance design, it is warmly welcomed by the scooter fans once launched.

http://www.airwheel.net/home/aftersale

1288 mm high, 613 mm long and 587mm wide, Airwheel S3 weighs almost 22.4kg and it could carry loads up to 120kg. S3 shows great capacity in running, whose max speed is up to 18km/h. Adopting the branded lithium battery, S3 is outstanding in quality and electricity range. With the item weight of 22.4kg, it is equipped with 14-inched tires, with unique tread pattern that helps drain water, dissipate heat and enhance grip performance that allow S3 to adapt more road conditions. No wonder it has been highly acclaimed since its release. S3 fast electric scooter enjoys a great fame as City Elf.

Even though S3 2-wheeled electric scooter enjoys fine quality, the regular maintenance is necessary to lengthen its service life, taking the tires for an example. Riders had better check the tire components from time to time. Only fully tighten the screws can ensure the firmness of the assembly. Of course, the extent of tire wear should be strictly controlled. The following is to illustrate how to replace the tires. Firstly, take out the inner tube and cover tire. Inner tubes are torus-shaped balloons made from an impermeable material, such as soft, elastic synthetic rubber.

 

electric self-balancing scooter

 

Then, you can take out the new tires and install them to S3.

 

electric self-balancing scooter

 

When mounted on the Airwheel S3, the wheel and tire may not be perfectly aligned to the direction of travel, and therefore may exhibit irregular wear. If the discrepancy in alignment is large, then the irregular wear will become substantial if left uncorrected. Wheel alignment is the procedure for checking and correcting this condition through adjustment of camber, caster and toe angles. The adjustment of the angles should be done as per the OEM specifications.

After installation, riders need to use the extended connector to inflate the tire of Airwheel S3 self-balancing electric scooter. Without the connector, they may fail to pump air into the wheel.

 

Smart electric self-balancing scooter


If the above contents cannot satisfy you, you are welcomed to visit https://youtu.be/mpvwluwDySA to have a better understanding of the tire replacement. 

Previous:Hulajnogi elektryczne podbijają świat
Next:Refuse Traffic Congestion with Airwheel R3 Electric Assist Bike
Airwheel facebook