Is it easy to sterilize Airwheel F3 smart fresh air mask? Yes, it can be finished with five steps. It is provided by one of our users.
Step 1: Disassemble
Turn left to unscrew the fresh air module, remove the mask strip and disassemble the front shell of the mask and take out the filter. It will only take about 20 seconds for experienced users.
Step 2: Boil water
Take a pot that fits completely in the F3, pour in water, and boil it. It’s totally ok to place F3 before or after the water boils. This step takes about half a minute.
Step 3: Put in
After water boiling, put the disassembled mask into the pot. Please note that the fresh air module and filter can not be put in. Throw all parts into the pot, the operation takes less than 10 seconds.
Step 4: Boil
Airwheel strictly selects high temperature resistant materials, and cooking them for a long time will not cause the mask material to change and affect subsequent use. According to relevant studies, boiling in water for five minutes can kill 99.9% of bacteria. So we suggest F3 can be boiled over 5 minutes, and pay attention not to dry the water.
Step 5: Dry and assemble
Turn off the fire, take it out, wipe it, let it cool and dry, and finally assemble it. Here, the speed is basically the same as the disassembly speed, about 26 seconds.
The above is the detailed description of disinfection process. While, in fact, in actual operation, it can be done in one go, which is much easier than cooking a bowl of instant noodles, and there is no need to control time, fire and other details. Of course, for daily use, Airwheel F3 smart electric mask can also be wiped and disinfected with alcohol, and boiled regularly at high temperature according to its own use.